Desnoyers Yseult. Furniture. November 16th , 2017.
Bedsteads. Bedsteads are what most of us consider a typical bed frame. The mattress support is usually made of wood slats that can be very flexible or tough and rigid. Wire mesh is another material used to make the support. The more rigid and cheap slats are further apart but the gap should not exceed 10cm. In addition, the wider the space between the slats, the more likely your mattress will be to wear out.
These chemicals that are used in these traditional mattresses are potentially very unhealthy to our babies. Chemicals that are used in these typical mattresses off-gas and the babies breath these gasses while they are sleeping. Phosphorus, antimony and arsenic are some of the chemicals that are used in the manufacture of the typical crib mattress. While there isnt actual proof that the use of these chemicals in these mattresses is related to SIDS (sudden infant death syndrome), what is known is that after chemicals were initially added to crib mattresses, the incidents of SIDS rose dramatically. While the chemicals used for the filling are bad enough, the moisture-proof vinyl covering has various potential health hazards as well. According to the FDA, the vinyl that has been used in the moisture-proof outer layer has been known to cause allergic reactions in many humans. Another issue with the moisture-proof vinyl outer layer is that this material does not breath and restricts air flow. When you consider that in conjunction with the chemicals used inside the traditional crib mattress it gets pretty scary. Even though the vinyl outer layer is moisture-proof, these chemicals can still leach through it and your baby can breath the gasses while inside the crib. The good news is that an organic crib mattress offers a safe and healthy option.
Before shopping for a mattress you need to arm yourself with pertinent information. First determine what type of bed is best for you. Do you like soft or hard beds? Would you prefer a standard mattress or a foam mattress? If you are not sure, go try out a few different mattress types. Second, consider your budget. This is not a purchase you want to scrimp on, as a poor nights sleep can affect your whole day. Try to get as much value as you can for your budget. Finally, size is a very important factor especially if there is more than one person sleeping in the bed. Ideally, you should both be able to lie on the bed with your arms behind your heads and not touch. A bed needs to be 10-15 cm longer than the tallest person sleeping in that bed. Also pay attention to the height. Lower beds can be easy to get into but harder to get out of. High beds can be hard to get into, especially for shorter people, but very easy to hop out of in the morning.
Water Beds. Waterbeds usually get their support from the amount of water in the mattress. There is no pressure on the body at all. These beds are known to be perfect for people suffering from allergies. Wave motion varies between beds. Some waterbeds also come with heaters to keep the bed warm.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does mbotgala claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.